Wenger 543.103 Watch User Manual


  Open as PDF
of 12
 
14
15
Additional Features
(All features may not be available on all models)
Rotating Bezel
This feature enables you to track elapsed time.
1. Turn the bezel counterclockwise until the zero indicator (60) is at the
minute hand.
2. The position of the minute hand in relation to the zero indicator on the bezel
will indicate the total number of minutes elapsed.
Deployant (Jewelry) Clasp
Deployantclosuresareusedtoassureasecuretofyourwatchandeasy
openingandclosing.Deployantclosuresonstrapsallowforaone-timetting
insteadofrettingeachtimethewatchisworn.
5. To stop timing the total event, push the top pusher.
6. Reset the stopwatch to zero by pushing the bottom pusher.
Recalibrating the Timer Hands on 12-Hour Models
1.Pulloutthecrowntoposition3.
2. Hold both pushers down simultaneously for 2 seconds; the center hand will
rotate to indicate that the corrective mode is activated. Release the pushers.
3. Adjusting the seconds hand: Hold or tap the top pusher until the desired time
is reached.
4. Adjusting the minute/hour counters: Tap the bottom pusher to switch to the
seconds adjusting mode. Then hold or tap the top pusher until the desired time
is reached.
5.ReturnthecrowntothefullydepressedPosition1.
 previous next