Wenger 543.103 Watch User Manual


  Open as PDF
of 12
 
6
7
Setting the Time and Date
Important note: If the crown of your watch does not pull directly out or if your
watch is water-resistant to 200m, then you may have a watch with a screw-down
crown. Rotate the crown counterclockwise until the crown moves away from the
watch.ThiswillsetthecrowninPosition1.Alwaysscrewdownthecrownafter
making any adjustments. This is very important as the screw-down crown assures
water resistance.
1. PulloutthecrowntoPosition2(one“click”out).Rotatecrowncounter-
clockwise until the date shows one day earlier than the date you want to set.
2. PulloutthecrowntoPosition3(two“clicks”out).Rotatecrownsothewatch
hands move clockwise until the current date shows. Then set the watch hands to
the correct time. Turn the watch hands past 12 once if you’re setting the watch
foraP.M.time.
3. ReturnthecrowntothefullydepressedPosition1,assuringthecrownhasbeen
further screwed down on all 200m watches.
Using the 30-Minute Chronograph (Stopwatch) Feature
The chronograph feature is a stopwatch which measures minutes, seconds, and
1/10 of a second. It is also capable of measuring split-timed events (timing a
continuous event and sub-events simultaneously; e.g., timing an individual lap
and an entire race). Note: the 1/10-second timer (right subdial) will not move
until the stop button is pushed. It will then record the elapsed 1/10-seconds.
Position 1 Position 2 Position 3
 previous next