Filter
Top Products
1. Before beginning assembly, be sure that you
have read and understand the information in
the box above.
Press two 2” Outer Caps (51) onto the indicated
locations on the Stabilizer (5). Press two 2” Inner
Caps (27) into the indicated ends of the Stabilizer
and the Base (4).
Insert four 5/16” x 2 1/2” Carriage Bolts (1) up
through the Stabilizer (5).
Attach the Base (4) to the Stabilizer (5) with two
5/16” x 2 3/4” Bolts (11), two 5/16” Washers (8),
and two 5/16” Nylon Locknuts (3). Do not tighten
the Nylon Locknuts yet.
Slide the VKR Upright (74) and the Squat Upright
(56) onto the 5/16” x 2 1/2” Carriage Bolts (1) in
the Stabilizer (5). The high side of the brackets
on the VKR Upright and Squat Arm Upright
should be on the side shown. Hand-tighten four
5/16” Nylon Locknuts (3) onto the Carriage Bolts.
Do not tighten the Nylon Locknuts yet.
FRAME ASSEMBLY
6
1
74
56
3
3
8
11
51
27
1
4
3
1
51
27
High
Side
5
2
2. Insert two 5/16” x 2 1/2” Carriage Bolts (1) up
through the Base (4).
Slide the Front Upright (42) onto the 5/16” x
2 1/2” Carriage Bolts (1) in the Base (4). Hand-
tighten a 5/16” Nylon Locknut (3) onto each
Carriage Bolt. Do not tighten the Nylon
Locknuts yet.
Press a 1” Inner Cap (6) into the Front Upright
(42). Press a 2” Inner Cap (27) into the Squat
Upright (56) and the VKR Upright (74).
1
4
3
6
42
27
27
74
56