Filter
Top Products
8
11. Press a 1 3/4Ó Square Inner Cap (44) into each end
of an Arm (46).
Apply lubricant to the lower axles on the Arm Frame
(52). Slide an Arm (46) onto one of the axles. Hold
two 1Ó Retainers (54) and a 1Ó Round Cover Cap
(55) against the lower end of the axle. The teeth
on the Retainers must bend toward the Round
Cover Cap (see the inset drawing). Tap the
Retainers and Round Cover Cap onto the axle.
Assemble the other Arm (46) to the Arm Frame (52)
in the same manner.
12. Insert the two 4 1/2Ó ÒLÓ Pins (60) down through the
indicated holes in the Arm Frame (52) and the Arms
(46).
13. Wet both Arms (46) with soapy water. Slide a 7 3/4Ó
Pad (45) onto each Arm.
Press a 1Ó Round Inner Cap (49) into the indicated
end of a 7Ó Handle (47). Insert the Handle into one
of the Arms (46). Attach the Handle with a 5/16Ó x 2
1/4Ó Bolt (33), two 5/16Ó Flat Washers (8), a 1/2Ó x
3/8Ó Spacer (51) and a 5/16Ó Nylon Locknut (3).
Attach a 7Ó Handle (47) to the other Arm (46) in the
same manner.
13
12
11
52
33
45
45
3
8
8
46
46
47
47
49
49
46
52
60
Bracket
Lubricate Axle
54
55
46
44
44
Axle
54
55
51