Filter
Top Products
13
25. Thread the Long Cable (2) through the Press Frame
(12). Wrap the Long Cable around a 3 1/2Ó Pulley
(35) in the direction shown.
Attach the Pulley to the Press Frame with a 3/8Ó x
3 1/4Ó Bolt (69), a Cable Trap (66), a 3/8Ó Flat Washer
(55) and a 3/8Ó Nylon Jamnut (57).
25
35
12
69
66
57
2
55
26. Wrap the Long Cable (2) around a ÒVÓ- Pulley (6) in
the direction shown. Attach the ÒVÓ-Pulley to the
bracket (P) on the Seat Frame (36) with a 3/8Ó x
3 1/4Ó Bolt (69), a Cable Trap (66), a 3/8Ó Flat Washer
(55) and a 3/8Ó Nylon Locknut (63).
Note: The ÒVÓ-Pulley (6) should be attached to the
third hole, counting from the Front Upright (42).
26
36
2
55
63
6
P
66
69
27. Wrap the Long Cable (2) around a 3 1/2Ó Pulley (35)
in the direction shown. Attach the Pulley to the Press
Frame (12) with a 3/8Ó x 3 1/4Ó Bolt (69), a Cable
Trap (66), a 3/8Ó Flat Washer (55) and a 3/8Ó Nylon
Jamnut (57).
27
57
69
2
12
55
35
66
24. Move to the other side of the unit. Wrap the Long
Cable (2) around a 3 1/2Ó Pulley (35) in the direction
shown.
Attach the Pulley to the Front Upright (42) with a 3/8Ó
x 3 1/2Ó Bolt (54), a Cable Trap (66), a 3/8Ó Flat
Washer (55) and a 3/8Ó Nylon Jamnut (57).
24
42
54
57
55
35
2
66
42