Filter
Top Products
14
42
6
ATTACHING THE SQUAT BAR
The Squat Bar (25) can be attached to the Short
Cables (43) at the squat stations (see ATTACHING
THE PULLEY HOUSINGS above) with the two
Extension Straps (27) and four Clips (29). Adjust
the length of the Extension Straps as necessary.
43
29
29
7
Ball
26
43
29
29
27
43
43
25
ATTACHING THE PULLEY HOUSINGS
T
o use a high pulley station, slide the hook on the
High Pulley Housing (19) onto the bracket on the
C
rossbar (7). Attach the end of the Short Cable (43)
without the ball to the end of the Long Cable (42)
with a Clip (29).
Attach the other high pulley in
the same manner.
To use a squat station, attach the Pulley Housings
(19) to the brackets on the Base (not shown).
To use the low pulley station, attach the two Pulley
Housings (19) to the bracket on the Upright Base
(not shown).
19
ATTACHING THE HANDLES
A Handle (26) or the Ankle Strap (not shown) can be
attached to a Short Cable (43) at the high pulley or a
squat station (see ATTACHING THE PULLEY
HOUSINGS above), or to the Long Cable (not
shown), with a Cable Clip (29).