Filter
Top Products
18
30. Identify the Lat Cable (49). Route the Cable
up through the Left Top Frame (126) and over a
9
0mm Pulley (48). Attach the Pulley inside the
Left Top Frame with an M10 x 82mm Bolt (84),
t
wo M10 Washers (80), two 19mm Spacers
(67), and an M10 Nylon Locknut (77).
31. Route the Lat Cable (49) over a 90mm Pulley
(48) and down through the Left Top Frame
(126). Attach the Pulley inside the Left Top
Frame with an M10 x 82mm Bolt (84), two M10
Washers (80), two 19mm Spacers (67), and an
M10 Nylon Locknut (77).
32. Wrap the Lat Cable (49) under a 90mm Pulley
(48). Attach the Pulley, a Cable Trap (56), and
two Half Guards (55) to the Military Press
Frame (127) with an M10 x 50mm Bolt (97), an
M10 Washer (80), and an M10 Nylon Locknut
(77).
Make sure the Cable Trap and the Half
Guards are oriented as shown.
30
31
49
48
77
80
80
8
4
67
67
126
32
77
55
55
56
48
80
49
84
48
49
80
126
67
67
80
77
97
127
33.
Route the Lat Cable (49) up through the Left
Top Frame (126) and over a 90mm Pulley (48).
Attach the Pulley inside the Left Top Frame with
an M10 x 82mm Bolt (84), two M10 Washers
(80), two 19mm Spacers (67), and an M10
Nylon Locknut (77).
33
126
84
77
80
80
67
67
48
49