Filter
Top Products
11
16
16. Press a 60mm x 60mm Square Inner Cap (9) into
each end of the Left Top Frame (13). Place the Left
Top frame onto the Uprights on the left side of the
cage, so the welded brackets on the Top Frame fit
inside the Uprights.
Press a 60mm x 60mm Square Inner Cap (9) into
each end of the Right Top Frame (29). Place the
Right Top Frame onto the Uprights on the right side of
the cage, so the welded brackets on the Top Frame fit
inside the Uprights.
29
9
13
9
9
9
17. Attach the Left Top Frame (13) to the left Front
Upright (1) with two M10 x 78mm Bolts (33), four M10
Washers (6) and two M10 Nylon Locknuts (11). Note:
Do not tighten the Nylon Locknuts yet.
Attach the Right Top Frame (29) to the right Front
Upright (1) with two M10 x 78mm Bolts (33), four M10
Washers (6) and two M10 Nylon Locknuts (11). Note:
Do not tighten the Nylon Locknuts yet.
17
1
13
6
11
6
33
6
33
11
6
6
11
33
33
29
6
1