Filter
Top Products
7
3. Note: The following steps require two people.
Attach the Adjustment Leg (8) to the Rail (3) with an
M10 x 90mm Bolt (44) and an M10 Nylon Locknut
(32).
Attach the Support Leg (6) to the Rail (3) with an
M10 x 75mm Bolt (43) and an M10 Nylon Locknut
(32).
Note: Do not overtighten the Locknuts (32); the
Adjustment Leg (8) and Support Leg (6) must
pivot easily.
4. Have a second person hold the Cord (30) above
the Seat (1). See the inset drawing. Slide the Seat
Bracket (2) onto the Rail (3). Be sure that the
Wheels (21) are on top of the Rail and that the
Large Bushings (23) are below the Rail.
Note: Be sure the Seat (1) is oriented as shown
in the drawing.
5. Attach the Upper Bar (5) to the Rail (3) with two
M10 Washers (35) and two M10 x 25mm Bolts (36).
4
5
3
1
30
Decal
3
3
23
23
21
21
2
3
6
8
43
44
32
36
35
35
3
5