Filter
Top Products
Before beginning assembly, carefully read the
following information and instructions:
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight training system,
make sure all parts are oriented as shown in the
drawings.
• Assembly requires two people.
• For help identifying small parts, use the PART
IDENTIFICATION CHART on page 5.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One standard screwdriver
• One Phillips screwdriver
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end wrench-
es, or a set of ratchet wrenches.
Make Things Easier for Yourself!
Everything in this manual is designed to ensure
that the weight training system can be assem-
bled successfully by anyone. However, it is
important to realize that the versatile weight
training system has many parts and that the
assembly process will take time. Most people
find that by setting aside plenty of time, assem-
bly will go smoothly.
6
1. Attach the Stabilizer (4) to Rail (3) with two M10
Washers (35) and two M10 x 25mm Bolts (36).
2. Attach the Adjustment Foot (7) to the Adjustment Leg
(8) with two M10 x 55mm Bolts (42), four M10
Washers (35), and two M10 Nylon Locknuts (32).
1
ASSEMBLY
7
35
35
2
36
35
35
4
42
8
32
35
35
3