Filter
Top Products
8
11. Attach the Curl Pad (29) to the Curl Post (28) with
two M6 x 16mm Screws (30).
Press the two Weight Adapter Bushings (16) into
the Weight Adapter (15).
12. Press a Foot (51) onto the bottom of an Upright
(45).
Slide an Upright Bushing (46) onto the bottom of
the Left Weight Rest (47). Make sure the tabs
are on the side shown. Attach a Weight Rest
Bushing (54) inside the bottom of the Left Weight
Rest with two M4 x 16mm Screws (71).
Press the tab on the Upright Bushing (46) into the
indicated holes in the Left Weight Rest (47) Slide
the Weight Rest and Upright Bushing into the
Upright (45). Press the Upright Bushing into top
of the Upright. Secure the Weight Rest with an
Adjustment Knob (55).
Repeat this step with the other Upright (45)
and Right Weight Rest (48).
11
29
28
3
15
16
16
12
48
46
Tab
Hole
51
45
45
55
54
47
71
71
13. Attach the Frame (43) to an Upright (45) with two
Large Joint Plates (12), four M10 x 78mm Bolts
(67), and four M10 Nylon Locknuts (11). Do not
tighten the Locknuts yet.
Attach the Frame (43) to the other Upright (45)
in the same manner. Make sure the decals
applied to the Upright and Frame are in the
indicated locations.
13
45
Decal
Decal
11
12
12
45
67
43