Filter
Top Products
5
Before beginning assembly, carefully read the
following information and instructions:
• Assembly requires two people.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until assembly is completed.
• Tighten all parts as you assemble them, unless
instructed to do otherwise.
• As you assemble the weight bench, make sure all
parts are oriented as shown in the drawings.
• For help identifying small parts, use the
PART
IDENTIFICATION CHART.
The following tools (not included) are required
for assembly:
• Two adjustable wrenches
• One rubber mallet
• One standard screwdriver
• One Phillips screwdriver
• Lubricant, such as grease or petroleum jelly,
and soapy water.
Assembly will be more convenient if you have a
socket set, a set of open-end or closed-end
wrenches, or a set of ratchet wrenches.
Make Things Easier for Yourself
Everything in this manual is designed to ensure
that the weight bench can be assembled suc-
cessfully by anyone. However, it is important to
realize that the versatile weight bench has many
parts and that the assembly process will take
time. Most people find that by setting aside plen-
ty of time, assembly will go smoothly.
ASSEMBLY
1.
Press a 51mm x 76mm Inner Cap (21) into the
Front Leg (4). Press two 50mm Square Inner
Caps (22) into the Front Stabilizer (3).
Attach the Front Leg (4) to the Front Stabilizer (3)
with four M10 x 68mm Bolts (26), two Leg Plates
(78), and four M10 Nylon Locknuts (32). Make
sure the decal is in the indicated position. Do
not tighten the Locknuts yet.
2. Press two 50mm Square Inner Caps (22) into the
ends of the Rear Stabilizer (1).
Attach the two Wheels (38) to the Rear Stabilizer
(1) with two M10 x 45mm Bolts (27) and two M10
Nylon Locknuts (32). Do not overtighten the
Locknuts; the Wheels must be able to roll
easily.
Attach the Bench Frame (2) to the Rear Stabilizer
(1) with two M10 x 68mm Bolts (26), two M10
Washers (74), and two M10 Nylon Locknuts (32).
Make sure the decal is in the indicated posi-
tion. Do not tighten the Locknuts yet.
1
2
32
32
26
26
22
22
78
78
4
3
21
32
32
32
38
38
74
26
27
1
27
2
22
22
Decal
Decal
Before beginning assembly, make sure you
understand the information in the box
above.