Weider C670 Home Gym User Manual


 
22
4
21
MOVING THE BENCH
To move the weight bench, lift the Bench Leg (4) so
that the bench pivots onto the Wheels (21). Roll the
bench to the desired location and set the Bench Leg
down.
9
8
22
ATTACHING THE CURL PAD OR LEG LEVER
To use the Curl Pad (9), remove the Adjustment Knob
(22) and the Leg Lever Bracket (18) from the Seat
Frame (7). Slide the Curl Post (8) into the Seat Frame
and secure it in place with the Adjustment Knob.
Attach the Leg Lever (5) in the same manner.
18
5
7
WARNING: The Seat Frame (7)
must be positioned in the most inclined posi-
tion before using the Leg Lever (5).
34
82
33
87
88
TIGHTENING THE CABLES
Woven cable, the type of cable used on the weight
rack, can stretch slightly after it is first used. If there is
slack in the cables, tighten them by removing the M10
x 45mm Bolt (33) and the M10 Nylon Locknut (34)
attaching the lower Pulley (87) and Cable Trap (88) to
the two Pulley Plates (82). Reattach the lower Pulley
and Cable Trap to a higher set of holes in the Pulley
Plates using the Bolt and Nylon Locknut.