Filter
Top Products
19
50. Attach a Backrest (15) to the Right Upright (6)
with four M6 x 16mm Bolts (13) and four M6
Washers (35).
Repeat this step with the other Backrest (15)
and the Left Upright (not shown).
51. Slide the Long Pad Tube (17) through the hole in
the Right Leg (73). Slide two Foam Pads (18)
onto the ends of the Pad Tube. Press two 19mm
Round Inner Caps (27) into the ends of the Pad
Tube.
Repeat this step with the Short Pad Tube (94)
and the Leg Lever (4).
52.
Press a 50mm x 63mm Inner Cap (22) into the
indicated end of the
Adjustment
T
ube (88).
Attach the Leg Press Plate (31) to the Adjustment
T
ube (88) with an M8 x 65mm Bolt (63), two M8
W
ashers (75), and an M8 Nylon Locknut (71).
Attach the
Adjustment Tube (88) to the Leg Press
Frame (30) with the Leg Press Pin (87).
Be sure
the Pin is in the locked position around the
Leg Press Frame.
49.
Attach a Seat (16) to the Right Seat Frame (5)
with an M6 x 65mm Bolt (90), three M6 Washers
(35), and two M6 x 16mm Bolts (13).
Repeat this step with the other Seat (16) and
the Left Seat Frame (not shown).
16
35
90
5
13
49
6
13
35
15
17
27
73
27
4
18
18
94
13
35
50
51
75
71
31
22
63
30
87
88
75
52
SEAT ASSEMBLY