Filter
Top Products
8
10. Attach the Seat (18) to the Bench Frame (19) with
two M6 x 16mm Screws (6).
11. Press 3/4” Round Inner Caps (25) into the ends of
all three Pad Tubes (27).
Insert a Pad Tube (27) through the indicated hole in
the Leg Lever (23). Insert another Pad Tube through
the other hole in the Leg Lever. Insert the remaining
Pad Tube through the hole in the Front Leg (20).
Slide two Foam Pads (26) onto each Pad Tube (27).
10
11
18
6
19
25
25
26
26
26
27
27
27
23
20
26
26
12. Be sure that all parts have been tightened properly. The use of all remaining parts will be explained in
ADJUSTING THE WEIDER PRO 205 beginning on page 9 of this manual.