Filter
Top Products
23
43. Attach the Seat (32) to the Seat Frame (8) with
two M6 x 16mm Screws (88), an M6 x 32mm
S
crew (89), and an M6 Washer (114).
I
nsert the Seat Frame (8) into the Frame (9).
Tighten the Seat Adjustment Knob (52) into the
Frame and the Seat Frame. Make sure the
Adjustment Knob passes through one of the
holes in the Seat Frame.
44. Insert a Pad Tube (13) through the indicated hole
in the Front Leg (10). Slide a Foam Pad (36) onto
each end of the Pad Tube.
Press a Pad Cap (37) into an end of each Foam
Pad (36).
Repeat this step for the other Pad Tube (13)
and the Leg Lever (12). Note: Lift the Leg
Lever Cable (51) when inserting a Pad Tube
through through the hole in the bottom of the
Leg Lever.
45.
Attach the Butterfly Cover (30) to the Butterfly
Bracket (5) with four M4 x 12mm Self-tapping
Screws (102).
43
44
13
13
51
12
10
36
89
1
14
32
52
88
9
8
37
36
37
45
30
102
102
5