Vision Fitness T9300 Treadmill User Manual


 
5
ALL MODELS
WALL POWER TO TREADMILL
This product is for use on a nominal 120-volt circuit, and has a grounding
plug that looks like the plug illustrated below. A temporary adapter such
as the one illustrated below may be used to connect this plug to a 2-pole
receptacle as shown, if a properly grounded outlet is not available. The
temporary adapter should be used only until a properly grounded outlet
can be installed by a qualified electrician. The green colored rigid ear,
lug, or the like extending from the adapter must be connected to a
permanent ground such as a properly grounded outlet box cover.
Whenever the adapter is used, it must be held in place by a metal screw.
Surge Protectors or Extension Cords should not be used. They do not
supply enough electricity to the treadmill and can damage it.