Filter
Top Products
16
Z37
7
STEP
• Align holes in rear shield (Q03) with the
holes in the brackets on the back side of
the weight stack; loosely secure using 8
bolts (M5x10). Take the left (Q01) side
shield and repeat on front side of weight
stack tower using five bolts (M5x10).
Tighten interior brackets. Attach the right
(Q02) side shield with five bolts (M5x10).
Tighten all bolts.
• Attach the slip-on nuts (Z37) to the left
weight stack upright openings. Snap the
two top covers (Q06 & Q07) together.
With tallest point facing the rear of the
machine, place the top covers on top of
the weight stack tower and secure using
six screws (M5x15).
RED BAG