Filter
Top Products
9
ST200 ST250
SEATBACK POSITIONING
(
ST200
&
ST250
)
The vertical adjustment (
ST200
only) is also located on the right
side of the seatback. Follow the
same procedure that you used to
position the seat vertically.
NOTE:
make sure you have a firm
grasp on the bottom of the
seatback, before pulling the head
of the pull pin. The horizontal
adjustment (
ST200
&
ST250
),
also known as your range of
motion adjustment, is located at
the pull pin, on the left side of the
seatback (
ST200
) and the top rear
(
ST250
). Grasp the seatback with
your right hand, on the right side.
Disengage the pull pin head, from
the hole it is in, by pulling out. If
you can’t pull out and disengage
the post, you will need to turn the
head counterclockwise until loose.
While holding the head out, pull
or push the seatback to the desired
hole, and engage the post in that
hole. Tighten the head by turning
clockwise, until it is snug.