Filter
Top Products
8
ST200
SEAT POSITIONING (
ST200
)
The vertical adjustment is located
at the pull pin on the right side of
the seat. Make sure the seat is
positioned at the front. Kneel
down and hold the bottom of the
seat structure with your left hand.
Make sure the pull pin head is
loose (you will be able to pull the
spring loaded pull pin partially out
of the oval tube it is engaged in. If
it isn’t, you will have to make
several turns counterclockwise until
you can pull it). After you have
disengaged the pull pin head from
the hole it was located in, adjust
the seat up or down, to the
appropriate hole. Once you are
there, engage the pull pin post in
the hole and tighten the head
clockwise until it is snug. This will
ensure total stability.
To swivel the seat to the side, kneel
down at the front of the seat.
Grasp the seat with your left hand
and pull down on the pull pin
head to disengage the post from
the hole it is in. While holding the
head down, rotate the seat all the
way to the next hole. Make sure
the post engages in this hole when
you release the head of the pull
pin. Repeat that process to swivel
the seat back to the front.