Filter
Top Products
English Specificsection
20
SETTING THE TIME
1. Windthe movement if necessary.
2. Pullout the crown to position 2.The seconds hand will stop.
Remember the date advances at 12:00 midnight,not 12:00 noon.
3. Turn the crown to position hands to the desiredtime.
4. Pushthe crown back to position 1.
SETTING THE DATE
1. Windthe movement if necessary.
2. Pushthe date corrector (pusher C) until the requested date appears.
Note: the correction of the date is not possible between
8:30 p.m.and 2:00 a.m.
V. SPECIFIC SECTION
ROTATING BEZEL WITH COUNTUP
FUNCTION
When a scale is going from 5 to 60 (clockwise
incrementation) we may use the bezel as a
counter,to count up to 60 minutes.
The rotating bezel enables divers to measure
both dive time and any other lapse of time. To
measure time,simply turn the bezel to align the
triangle (0 or 60) of the scale on the minute
English USA Chrono VSA USA 30.9.2009 10:35 Page 20