Filter
Top Products
4. Turn it counter-clockwise to the desired date.
5. Push the crown back to position 1.
Adjusting the date and day for allother timepieces
(For timepieces with alarm and dual time features, please refer to the related
sections in Chapter III):
1. Pull out the crown to position 3. Turn the crown counter-clock-
wisetomovehandsuntilyoureach midnight(asthecalendarjump
phase is situated at 12:00 midnight or between 10:30 p.m. and
12:00 midnight) and then set the correct time.
2. Set the crown in position 2.
3. Turn it clockwise to the desireddate.
4. Turnitcounter-clockwisetothe desiredday(ifyour timepieceisfit-
ted with this function).
5. Push the crown back to position 1.
MANUAL OR AUTOMATIC WINDING
Crown in position 1 (unscrewed)
Manual winding: You must wind any simple mechanical timepiece daily and at a
regular time in order to ensure the smooth running of your timepiece.All you have
to do is turn the crown back and forth until you feel a slight resistance. (To avoid
damaging the mechanism,do not over-wind.)
Automatic winding: Mechanical self-winding timepieces wind themselves
automatically when worn on the wrist. If your timepiece stops or is not worn
6
English Instructionsforuse:Manualorautomatic winding
English USA Basic VSA 24.9.2009 11:21 Page 6