Filter
Top Products
4 ::
:: 5
Help function provides advice and information on how to use Gamma
300. You receive general information (a tutorial) on operating Gamma
300 by pressing the Help key for 3 seconds. Help instructs you on using
every function from inside the particular function. Help text is cleared
when you press the Help key again.
B. Operation keys
Operation keys are used to direct a particular function and are located to
the left of the display. When an operation key is active, an info-label is
displayed to the right of the key e.g. Password, Replace, OK.
C. Setting keys
Setting keys are situated to the right of the display. They are used to
set the values and characters on-screen. The left/right keys are used for
navigation, while the up/down keys are used to set values. Symbols on
the display for the active arrow keys show which you can use to adjust
values or navigate.
D. Speed control keys
Speed control keys (Tortoise/Hare) are located below the display. Hare
key increases the belt speed in 0,1 km/h (or 0,1 mph) increments, the
tortoise key decreases it in 0,1 km/h (or 0,1 mph) increments. Pressing
these keys longer makes the speed change faster. Track speed ranges from
0.5-16 km/h.
E. Elevation control keys
Elevation control keys (elevation arrows up and down) are located
below the display. The elevation up key increases the elevation in 1 %
increments, the elevation key down decreases it in 1 % increments. Track
elevation ranges from 0% (horizontal) to 10%.
F. STOP-key
Stops the treadmill motor and running belt.
EXTRA ::
The Extra function helps you make settings and adjustments to Gamma
300 properties. Modifi able features are the clock, calendar, brightness,
volume and default language.
1. Press function key Extra.
2. Press operation key Settings.
:: Use operation key Time/Date to set the clock and calendar. Set
the numeric values with the up/down setting keys and navigate
with the left/right keys. Press OK to confi rm your settings.
:: Use operation key Display to adjust display brightness on a scale
0-7, where 0 is the darkest. Use the up/down setting keys to make
any adjustment and then press OK to confi rm.
:: Use operation key Sound to adjust the volume level on a scale
0-7, where 0 is the quietest. Use the up/down setting keys to make
any adjustment and then press OK to confi rm.
:: Press operation key Back to return to the main Extra display.
3. On the right of the display, you will see a list of languages
Gamma 300 speaks: English, German, French, Dutch, Italian,
Swedish and Finnish. The factory default setting for Gamma 300
is English. Use the up/down setting keys to select your language.
No confi rmation is required.
4. Press the
i
-key to view version information for your exercise
equipment and the total elapsed values (total usage time and
distance).
5. Operation key SW is for software updates.