Filter
Top Products
2 ::
:: 3
WELCOME TO THE WORLD OF
TUNTURI EXERCISING!
Your choice shows that you really want to invest in your well-being
and condition; it also shows you really value high quality and style.
With Tunturi Fitness Equipment, you’ve chosen a high-quality, safe and
motivating product as your training partner.
This guide is an essential part of your exercise equipment. Start
familiarising yourself with the Tunturi T.I.E. interface by carefully
reading this manual. It offers the information you need for both the
use and maintenance of your equipment. This manual is well worth
keeping, as you may need these instructions later on.
1. INSTALLATION ::
1.1 Turning the user interface on and off
3. PULSE MEASUREMENT ::
2. KEYS ::
2.1 Function keys
2.2 Rec and OK
2.3 Reset
2.4 Setting keys -/+
4. MAIN DISPLAY ::
5. FUNCTIONS ::
5.1 Adjusting resistance
5.2 Reset
5.3 Mode
5.4 Prog
5.5 Recovery
5.6 Pause
5.7 Set
6. MAINTENANCE ::
1.1 TURNING THE USER INTERFACE ON AND OFF
The user interface turns itself on when the device is connected to the
mains current. When the user interface has not been used for fi ve minutes
(no heart-rate registered, no keys pressed, no pedalling), it automatically
switches itself to energy-saver state. Alpha 150 is returned to its active
state by pressing any key, starting to pedal or sending heart-rate signals
to the unit. When you restart, Alpha 150 automatically starts from Mode
function.
:: Protect Alpha 150 from excess sunlight, because that may fade
the interface box and surface membrane colours. Please also be
careful not to allow Alpha 150 to come into contact with
water. A sharp blow may damage the interface.
1. INSTALLATION ::
Push the T.I.E. interface module carefully into place at the top of
the handlebar support tube. The loose screws hanging from the metal
fastening plate on the bottom of the T.I.E. module must enter the holes
at the top end of the handlebar. Make sure that the module is correctly in
place and tighten the fastening screws.