Filter
Top Products
CS 8.0 Owner’s Guide
Getting Into Setup Mode
82
How to
Get Into
Setup Mode
Press and hold .
Begin pedaling the bike, or power up with external power.
At the five-digit “Pass Code” prompt, enter 1 0 1 0 1 . If you make
a mistake, start entering the code from the beginning. Press
.
The first Setup Mode screen will be displayed. Pressing
will
switch to the second screen.
Press to accept each parameter and move to the next one.
When you’re done making changes, let the bike power all the way
down (the orbiting LEDs on the front overlay will go out). The
changes will take effect the next time the bike powers up.