Timex M878 Heart Rate Monitor User Manual


  Open as PDF
of 28
 
5
CHOOSE THE PRIMARY TIME ZONE
To select the primary time zone:
1. PressSET.
2. PressDOWNtoselectPRIMARY,andthenpressSELECT.
3. PressUPandDOWNtoselectthetimezoneyouwanttosetasprimary,andthenpressSELECT.
4. PressDONE.
VIEW THE ALTERNATIVE TIME ZONES OR SWITCH ONE TO PRIMARY
FromtheTimeofDaydisplay:
1. PressDOWNtovieweachalternativetimezone.Thesecondsvaluechangestoidentifythetimezone
(T1,T2,orT3)beingtemporarilydisplayed.
2. PressandholdDOWNtomakethattimezonetheprimarytimezone.Amessagepromptsyoutoholdthe
buttonuntilthetimezoneischanged.
CUSTOMIZE THE DISPLAY VIEWS
InTimeofDay,Chrono,IntervalTimer,andTimermodes,youcansetuptheRUN,CUSTOM1andCUSTOM2
displaystoshowvariousstatisticaldatawhenGPSorANT+
™
sensors are active.
NOTE:Whilethesedisplayshavethesamenameineachmode,theyareindependentfrommodetomode.
InEACHofthesemodes:
 1.PressSET.
 2.PressSELECTtoopentheDISPLAYmenu.
 3.PressUPorDOWNtoselectthedisplayviewtocustomize(RUN,CUSTOM1,CUSTOM2),andthen
pressSELECT.
 4.PressUPorDOWNtochoose3-Lineor4-Line.PressSELECTtocheckthedisplay(3or4line)touse
for the view.
 5.PressDOWNtoselectSETUP,andthenpressSELECT.
 6.PressUPorDOWNtoselect3-or4-LINEtocustomize,andthenpressSELECT.
 7.PressUPorDOWNtoselectthelineforwhichyouwanttochooseadisplayitem,andthenpressSELECT.
 8.PressUPorDOWNtochoosethedatathatwilldisplayintheline,andthenpressSELECT.
A check mark appears.
 9.PressBACKtoreturntothe3-or4-LINEmenu.
10.Repeatsteps7through9untilyouhavechosenadisplayvalueforeachline.
NOTE:Thesestepswillsetupeachdisplay,buttoselectthedisplayforeachmode,youneedtobeinthat
modewithatleastGPSoroneANT+
™
sensor active.
SELECT THE DISPLAY VIEWS
InTimeofDay,Chrono,IntervalTimerandTimermodes,YoucanselecttheDEFAULTdisplayoranyofthethree
customizabledisplays(RUN,CUSTOM1,andCUSTOM2).
1. PressRADIOtoturnontheGPSand/orANT+
™
sensors–theiconswillblink.
2. PressRADIOtocyclethroughthedisplayviews.
Values that can be Displayed in Time of Day Mode
Data Units
Altitude FeetorMeters
Cadence & Average Cadence StepsperMinute
Calories KiloCalories
Date DD-MMorMM-DDformat
Day DayofWeek
Distance&SegmentDistance MilesorKilometers/FeetorMeters
 previous next