Filter
Top Products
1-45
• Press SET/FORMAT (SELECT) to go “down” to the next level in
the hierarchy, or to enter the setting state for the option that
you are looking at.
• Press MODE (DONE) to go back “up” to the group selection.
“Quick-Set” Option Settings
Many of the options have a default setting that may be changed
without having to enter setting state simply by pressing the
START/SPLIT button while viewing the option. This “quick-set”
1-44
feature is indicated by the presence of the “+” symbol on the
display above the START/SPLIT button – when it is visible, a
“quick-set” feature is present. For example, in HRM settings, when
viewing the target zone setting, pressing the START/SPLIT button
will change the zone preset. “Quick-Set” is used only for option
settings that don’t need numeric data to be changed. If you need
to change your Auto-Split interval, for instance, you would have to
enter a set mode. However, you have the option to turn the fea-
ture on and off with a “quick-set.”
The “Quick-Set” feature for each of the options is indicated in the
following sections.
Changing the Option Settings
1. Press SET/FORMAT (SELECT) to begin the setting procedure for
the option that you have selected.
2. The first data value will begin flashing. Press DISPLAY (
+) or
STOP/RESET (
–) to increase or decrease the value, respectively.
You may hold the keys down to quickly advance through the
value.
3. Press SET/FORMAT (SELECT) to advance to the next value, and
so on, until the option is set to your liking.
4. Press MODE (DONE) to exit the setting state.
INDIGLO
Done
viewing
options
Next
option
Previous
option
“Quick Set” function
Select this
item