Filter
Top Products
NIGHT-MODE
®
FEATURE
TO USE NIGHT-MODE
®
FEATURE:
1. PUSH and HOLD Crown to “D”position for 4 sec-
onds to activate NIGHT-MODE
®
feature.
PRESSING any pusher will
cause the INDIGLO
®
night-light to stay on for 3
seconds.
2. NIGHT-MODE
®
feature will last for 8 hours.
3. Or PUSH and HOLD Crown to “D”position for 4
seconds to deactivate Night-Mode
®
feature.
IF STOPWATCH HANDS DO NOT RETURN TO
“0 POSITION”WHEN THE STOPWATCH IS
RESET:
1) PULL crown out to “B”position
2) PRESS pushers “A” or “B” repeatedly to move
hands to “0”position
3) PUSH in crown to “A” position
35
ENGLISH
STANDARD CHRONOGRAPH
MEASUREMENT:
1. PRESS pusher “A” to start timing.
2. PRESS pusher “A” to stop timing.
3. PRESS pusher “B”to reset.
SPLIT TIME MEASUREMENT:
1. PRESS pusher “A” to start timing.
2. PRESS pusher “B”to split.
3. PRESS pusher “B”to resume timing.
4. PRESS pusher “A” to stop timing.
5. PRESS pusher “B”to reset.
INDIGLO
®
NIGHT-LIGHT
With the crown in the “A” position,PUSH crown to
the “D”position.Entire dial will be illuminated.
Electroluminescent
technology used in INDIGLO
®
night-light
illuminates entire watch face at night and in low light
conditions.
34
ENGLISH
W223_Analog2_NA_EN.qxd 6/5/09 9:19 AM Page 34