Filter
Top Products
TO ADJUST CHRONOGRAPH HANDS:
1. PULL crown out to “B”position.
2. PRESS pusher “B”until the hand at the 10 o’clock
eye resets to the “30”position.
3. PULL crown out to “C”position.
4. PRESS pusher “A” until the chronograph second
hand resets to the “0”or “60” or 12-hour position.
5. PRESS pusher “B”until the hand at the 2 o’clock
eye resets to the “0”position.
6. PUSH in Crown to “A” position.
NOTE:
• Make sure the chronograph is stopped and reset
before adjusting.
• PRESSING and HOLDING either pusher “A” or “B”
for 2 seconds will cause the hands to move
continuously until the pusher is released.
33
ENGLISH
CHRONOGRAPH
THE CHRONOGRAPH IS CAPABLE OF
MEASURING:
• 1/20 seconds elapsed up to 1 second (2 o’clock
eye).
• Seconds elapsed up to 1 minute (chronograph
second hand).
• Minutes elapsed up to 30 minutes (10 o’clock
eye).
NOTE: Chronograph will operate continuously for
4 hours,after which it will automatically stop and
reset.
NOTE: The 1/20th of a second hand does not
move during chronograph function,the 1/20th
seconds are indicated when chronograph is
stopped and not yet reset.
BEFORE USING THE CHRONOGRAPH,adjust all
the chronograph hands to the “0” or 12-hour
positions.
32
ENGLISH
W223_Analog2_NA_EN.qxd 6/5/09 9:19 AM Page 32