Filter
Top Products
9
INTRODUCTION
IMPORTANT
PRECAUTIONS
ABOUT YOUR
TREADMILL
BEFORE
YOU BEGIN
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
MOVING / STORAGE
This treadmill has a pair of transport
wheels built under the base frame. To
move, make sure the treadmill is folded
down and securely latched. Then, firmly
grasp the lifting handlebar, lift the
treadmill up and roll. This treadmill can
be stored horizontally (under a bed) or
vertically (against a wall).
To store underneath a bed, firmly grasp the lifting bar and
move the treadmill. Gently lower and push the treadmill
under the bed. (See illustration above)
CAUTION:
To prevent damage to the treadmill, make sure the area has
enough space to store the treadmill.
This treadmill is equipped with two STABILIZER LEGS on the front
side. To store the treadmill vertically, follow these steps:
To stand the treadmill up, pull the STABILIZER LEGS outward.
Turn the STABILIZER LEGS so they face upward.
Push the STABILIZER LEGS back in to lock them in place.
Place the treadmill close to wall with the STABILIZER LEGS
facing the wall. Carefully lift the treadmill up using the
LIFTING BAR
.
Pull the STABILIZER BRACKET upward.
Rotate the STABILIZER BRACKET down all the way to the floor.
The STABILIZER BRACKET will automatically lock in place.
To put the treadmill back down, pull the STABILIZER BRACKET
towards you and rotate it upward until it locks.
Follow the steps above in reverse order to completely put the
treadmill back down.
1.
2.
3.
4.
5.
6.
7.
8.
M O V I N G AN D ST O R AGE
Our treadmills can be heavy. Use care and additional help if necessary when
moving. Do not attempt to move or transport treadmill unless both the lock
latches are secured. Failure to follow these instructions could result in injury.
WARNING
1
3
STABILZER LEG
2
5
6
4
STABILZER
BRACKET
LIFTING BAR