TAG Player System Games User Manual


 
RELD: <##> - Number of reloads available for each player.
Each reload gives you 10 additional tags. This value can be
anywhere from 0 to 99, or unlimited (“UL”).
MEGA: <##> - Number of Mega-Tags available for each
player. This value can be anywhere from 0 (no Mega-Tags
allowed) to 99, or unlimited (“UL”), but can never be greater
than the total number of tags.
SHLD: <##> - Total seconds of shield time available for each
player. This value can be anywhere from 0 (no shield time
allowed) to 99 seconds.
TAGS: <##> - Number of Tags each player can take until
they are tagged out. This can be any number from 1 to 99.
5. Program the functions for the game using the INC. and
DEC. buttons to increase or decrease the value or to switch
between Y and N. You can also hold down the 2ndF button
and press INC. or DEC. to increase or decrease the value by
10. If you want to select “UL”, it is located just below 00 and
just above 99. Once you have adjusted each value to your
desired amount, press OK to select that value and move on to
the next option to be adjusted.
If you need to go back and change something, you can press
CANCEL to back-up through the options until you get to the
one that you want to change. All the other options that you
have already set will remain programmed, so you can simply
press OK to skip over them.
Once you have set the number of TAGS (the last option), the
screen will display: “ADD” above two numbers, and will begin
making a sound effect. This sound effect indicates that the
TAG MASTER will start joining other players into the game.
The top number is the total number of players who are now
in the game, and the bottom number is a countdown timer for
the game’s automatic start (it will start automatically if that
counter reaches 00 and there are at least 2 players in the
game). The TAG MASTER needs to wait until all players have
successfully joined the game before starting the game. The
TAG MASTER can delay the automatic start of the T-Minus
countdown by pressing OK at any time to restart the 60-
second timer.
6. The TAG MASTER can start the game by waiting for the
lower countdown to reach 00, or at any time after at least 2
players are in the game by pressing 2ndF and OK. All Joiner
TAGGER units must come close to the TAG MASTER TAGGER
for several seconds during this period. The LCD screen will
now show the T–Minus screen and the TAGGER will count
down from T-30, T-29, T-28, etc. and beep each time to alert
the players, until it reaches T-00 at which point the TAGGER
will say “GOOD LUCK!” and the game begins! The TAG MASTER
should remain in one place until all other players have begun
the T-Minus countdowns on their own screens, at which time
14