Filter
Top Products
6
Step 1: Getting started
Your SWATCH
®
Paparazzi is delivered in OFF mode and
has been 100% charged on leaving the factory. It may, ho-
wever, be necessary to partially recharge it (see charging
procedure on page 9).
A. Unpackage and start your watch
1. Remove your watch and the charger from the
packaging.
2.Simultaneously press the PREVIOUS, ENTER and
NEXT buttons. This operation causes your watch to restart
(“Reset”). After a few seconds, the SWATCH
®
welcome
page appears, followed by a SWATCH
®
watch face.
Note:
If your watch screen remains blank, you may need to rechar-
ge your watch. For more information, see the charging pro-
cedure on page 9.
Step 2: Activate the service
A. Press PREVIOUS or NEXT until the Register screen
is displayed.
B. Wait a moment or press ENTER until your watch
displays your ID number.
C. From a computer connected to Internet, go to
www.msndirect.com, click on Begin Activation, and
then follow the instructions to activate the
service.
D. When the Done page appears, click Personalize
Service Now, and then follow the instructions on your
screen.
Congratulations! Your service is now activated
and personalized. To change your selections, return to the
Web site, and then click the Channels tab.
Getting started