Filter
Top Products
48
select and erase another file. After the deletion, you can start the chrono. For more
information about erasing memory files, refer to chapter 3.6.2.
Time/Heart Rate
The third row displays the heart rate.
If the heart rate monitor is not active, the third row displays the current time. When
you enter the Chrono mode, the third row displays the time. If, however, Suunto X6hr
receives a heart rate signal, the third row automatically switches to showing heart rate.
If the reception of the heart rate signal is discontinued, “—-“ appears on the third row. If
the signal is not received within 5 minutes, the third row starts showing the time again.
To reactivate the heart rate display, switch to another mode and then return back to
Chrono mode.
3.6.2. Memory
The Memory function records time and altitude data always when the stopwatch is active.
Heart rate data is recorded only when the transmitter belt is active. The same memory
file contains both altitude and heart rate data, but the data is viewed separately with
View Alti and View HR. You can view the data simultaneously with the PC software.
If the transmitter belt was not active when the recording began, no heart rate data is
viewable in the memory file.
Viewing Heart Rate memory
The memory file can be viewed in relation to heart rate data.
To view a memory file:
1. In the Function menu, scroll to
Memory with the arrow buttons and press Suunto.
The memory menu is displayed with View HR in reversed color.