Suunto M2 Heart Rate Monitor User Manual


 
buttons off: you will hear all other sounds, except button presses
all off: all sounds are off (when the sounds are off, is shown on the
display during exercise)
TIP: Switch the sounds on or off ( ) during exercise by keeping pressed. You
cannot switch the sounds on, if you have set sounds to all off .
Example: adjusting alarm settings
When the alarm is on, is shown on the display.
To set the alarm on/off:
1. In the time view, keep pressed to enter the settings.
2. Browse to alarm with and confirm with .
3. Set the alarm on or off with and . Confirm with .
4. Set the alarm time with and . Confirm with .
When the alarm sounds, press stop ( ) to turn it off.
After you have stopped the alarm, it sounds the same time the following day.
Remove the alarm in the settings.
25
en