Filter
Top Products
■
You can adjust treadmill speed from 0.5 to 10.0 mph (0.8 to 16.0 kph) for 110-volt units or 0.5 to 12.0 mph (0.8 to 19.3
kph) for 220-volt units, in 0.1 mph (or 0.1 kph) increments. Press the key to increase the treadmill speed; press
the key to decrease the treadmill speed.
13. You can adjust your time goal during the program:
■
You can adjust your time goal from 5 minutes to the maximum allowed program time. Press the ADJUST key to
increase your time goal; press the A
DJUST key to decrease your time goal.
14. If desired, you can use the personal cooling fan during your workout (see “Using the Cooling Fan” for details).
15. You can pause the program during your workout by pressing the S
TOP key once. The program will pause for a preset peri-
od of time (either 30, 45 or 60 seconds, as set in the Manager Settings mode). Press the START key BEFORE the pause
timer expires to resume your program. The treadmill returns to its minimum speed when you exit the pause mode.
16. When you have reached your workout goal, the treadmill will enter the Cooldown cycle (see “Cooldown Cycle” for more
information). If you wish to exit your program before you have reached your workout goal, press the STOP key twice. The
treadmill will slow to a stop. (Press the STOP key once during a Pause to exit the program.)
To operate the FIT TEST program:
The Fit Test is a modified version of the Balke and Ware protocol for maximal VO2 treadmill testing.The Fit Test requires 12 min-
utes to complete. During the Fit Test, treadmill speed remains at a constant 3.4 mph. Treadmill incline is set at 0% during the
first minute, increases to 2% during the second minute, and increases by 1% per minute for the remainder of the test. Your heart
rate results are compared with charted data for your corresponding age and gender. Test results are given on a scale of 1 to 10,
and include your calculated VO2 max. VO2 max is a physiological measurement of a bodies ability to absorb oxygen and has spe-
cific correlation to your fitness level.
NOTE: You must wear the heart rate strap during the FIT TEST to monitor your heart rate.
During program setup, you can use the B
ACK key to return to a previously accepted parameter.
1. Stand on the running belt; press the key, then press the key. You are prompted to enter your weight.
You may enter your weight manually as described below, or you may use the weight scale to enter your weight (PRO
ELITE only; see “Using the Weight Scale” for details).
■
If you do not use the weight scale to enter your weight, the treadmill will display a default weight of 155 pounds (70
kg). You may enter any weight from 0 to 350 pounds (0 to 135 kg).
■
You can enter your weight using the numeric keypad. Use the keys to enter your correct weight.
■
You can press the or key, as necessary, to increase or decrease the displayed weight in 1 pound (or 1 kg)
increments.
■
When your correct weight has been entered, press the START or ENTER key to accept the displayed value and advance
to the next parameter.
2. You are prompted to enter your age.
■
You may enter any age from 1 to 99 years.
■
You can enter your age using the numeric keypad. Use the keys to enter the desired age.
■
You can press the or key, as necessary, to increase or decrease your age in 1 year increments.
■
When your correct age has been entered, press the START or E
NTER key to accept the displayed value and advance to
the next parameter.
3. You are prompted to enter your gender.
■
Press the or key, as necessary, until the appropriate gender is displayed.
■
When your correct gender has been entered, press the START or ENTER key to accept the displayed value. You are
prompted with a 3 second countdown, then the treadmill begins the program.
4. The FIT TEST runs for 12 minutes. During the test, the treadmill speed is set at 3.4 mph. The treadmill incline begins at
0% for the first minute, increases to 2% for the second minute, and increases by 1% thereafter for each remaining minute
to a maximum incline of 12% during the final minute of the test.
During the test, you MAY NOT adjust treadmill speed or incline, and you MAY NOT pause the program. If your heart
rate exceeds 150 BPM for more than one minute, the test will terminate automatically.
5. If desired, you can use the personal cooling fan during the FIT TEST (see “Using the Cooling Fan” for details).
6. When you have reached your workout goal, the treadmill will enter the Cooldown cycle (see “Cooldown Cycle” for more
information). If you wish to exit your program before you have reached your workout goal, press the STOP key twice. The
treadmill will slow to a stop. (Press the STOP key once during a Pause to exit the program.)
0 9
0 9
FIT TEST
ATHLETIC PARTNER
STAR TRAC PRO S / PRO / PRO ELITE TREADMILL O
WNER
’
S
M
ANUAL
23