Filter
Top Products
17
620-7991 Rev 002
STEP 23.
Now that all the cables are in their places, and
confined to the post on the display mount, place
the display front plastic onto the back. Make
sure the bottom of the display front is under the
2 tabs on the display mount. Press the front dis-
play against the round tube and rotate it to the
back. Be careful not to pinch any wires.
STEP 21.
Feed the headphone jack cable from the PVS
display neck through the hole in the front dis-
play plastics where the blank cover was re-
moved earlier.
STEP 22.
Take the entertainment headphone jack from
the PVS kit and attach it to the cable that is
hanging out of the front of the display. Make
sure the connector is seated all the way into the
jack. Now slide the jack into the front of the dis-
play. Using a #2 Phillips screwdriver, fasten the
headphone jack into the front display with the
screw that was saved from the earlier step.