Filter
Top Products
24
620-7991 Rev 002
STEP 17.
Replace the top back plastic cover. Using a #2
Phillips screwdriver insert the (8) screws, re-
tained from earlier step, into the plastic.
Do Not tighten screws at this time.
STEP 18.
Check the cap with the neck and grommet.
Make sure the cap is flush with the top back
plastic. Adjust if necessary. Use the screwdriver
to tighten the screws snug from the previous
step.
Caution: Do not over tighten screws.
This completes the installation of the Personal Viewing Screen on the E-TR / E-TRx treadmill.
Now it is time to set it up. Turn to the appropriate section for your Personal Viewing Screen.