Star Trac 7700 Treadmill User Manual


 
Service Manual: E-TR and E-TRi
16
Cleaning a Running Belt
The running belt should be cleaned to help prevent dirt build up and maintain a nice appearance for
users.
To properly clean a running belt you will need:
TOOLS & MATERIALS
x Clean towel (1)
x Paint stick or ruler (1)
x Diluted all-purpose cleaner (409, Simple Green, etc.)
x Bristle brush
CLEANING PROCEDURE:
1. CLEAN BETWEEN DECK & BELT:
A. Using the paint stick or ruler, slide a dry towel under the middle of the belt from one side of the
frame to the other.
B. Hold the edges of the towel and pull towards the tail roller then pull back towards the head
roller.
C. Rotate the running belt around and repeat to completely wipe the entire underside of the belt.
TIP: Fold the dirty towel and shake into trash.
2. CLEAN BELT SURFACE
Spray the diluted cleaning solution onto a towel then wipe the running belt surface. For
heavier soiled areas, spray a tiny bit of solution onto the spot and use the bristle brush to
gently agitate the spot then wipe with the towel.
3. CLEAN SIDEBED COVERS
Spray the towel with cleaning solution to give a final wipe of the sidebed covers to help ensure
cleanliness.