Stamina Products CT2.0 Home Gym User Manual


 
STORAGE
14
1.
2.
3.
4.
To store the CT2.0 CROSS TRAINER simply keep it in a clean dry place.
The minimum rest dimensions of the CT2.0 CROSS TRAINER are approximately 40 3/4" long x 21 1/4"
wide x 58" tall. These dimensions may vary. Please measure your CT2.0 CROSS TRAINER if exact
dimensions are needed.
Grasp the pivot tubes on the HANDLEBARS(7, 8) and REAR STABILIZER(3) to move the CT2.0 CROSS
TRAINER, two people are required for moving. Do not use the Pedal Arms to move the CT2.0 CROSS
TRAINER.
To avoid damage to the METER(33), remove the batteries before storing the CT2.0 CROSS TRAINER
for one year or more.
MAINTENANCE
The safety and integrity designed into the CT2.0 CROSS TRAINER can only be maintained when the
CT2.0 CROSS TRAINER is regularly examined for damage and wear. Special attention should be given to
the following:
Adjust the TENSION KNOB(32) and verify that the Tension Strap provides tension.
Verify that the WARNING LABEL(92) is present and legible. Replace the WARNING LABEL(92) if it is
missing or damaged.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Worn or damaged components shall be replaced immediately or the CT2.0 CROSS TRAINER removed
from service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the CT2.0 CROSS
TRAINER.
Keep your CT2.0 CROSS TRAINER clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.