Filter
Top Products
ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Attach the FRONT STABILIZER(4), the shorter stabilizer with the ENDCAPS(52), to the front of the
MAIN FRAME(1) with CARRIAGE BOLTS(M8x1.25x60mm)(19), WASHERS(M8)(68), and ACORN
NUTS(M8x1.25)(57).
STEP 2
Attach the REAR STABILIZER(77), the stabilizer with the LEVELING CAPS(18), to the MAIN FRAME(1)
with CARRIAGE BOLTS(M8x1.25x60mm)(19), WASHERS(M8)(68), and ACORN NUTS(M8x1.25)(57).
NOTE: You can adjust the LEVELING CAPS(18) on the REAR STABILIZER(77) to keep the AVARI®
Magnetic Elliptical stable.