Filter
Top Products
ASSEMBLY INSTRUCTIONS
STEP 1
Refer to the illustrations below. Rotate the LEFT and RIGHT UPRIGHT(2, 3) to the upright position.
Install the TENSION KNOB(25) into the opening in the RIGHT UPRIGHT(3) and secure with ROUND
HEAD SCREW(M5x0.8x30mm)(40).
STEP 2
Insert the BASE FRAME(4) into the LEFT and RIGHT UPRIGHT(2, 3) and secure with BUTTON HEAD
BOLTS(M8x1.25x40)(37), ARC WASHERS(M8)(51), and NYLOCK NUTS(M8x1.25)(53).
STEP 3
Refer to detail view A. Lock the MAIN FRAME(1) in the unfolded position by inserting the LOCKING
KNOB(33) through the hole in the SUPPORT BAR(8) and screwing it into the MAIN FRAME(1).
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
A.