Filter
Top Products
1
8
7
7
8
7
8
8
7
4
7
8
3
ASSEMBLY INSTRUCTIONS
7
Place all parts from the box in a cleared area and position them on the oor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com under the Service section and order the part needed,
e-mail us at customerservice@staminaproducts.com, or call us toll free at 1-800-375-7520 (in the
U.S.). Our Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central
Time) Monday through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Refer to the illustration below. Place the MAIN FRAME ASSEMBLY(1) up-side down on the ground.
Position the REAR SUPPORT(3) with the ange plates facing out, then attach it to the rear side of the
MAIN FRAME(1) with BUTTON HEAD BOLTS(M10x1.5x25mm)(7) and WASHERS(M10)(8).
STEP 2
Attach the EXTENSION FRAME(4) to the MAIN FRAME(1) with BUTTON HEAD BOLTS
(M10x1.5x25mm)(7) and WASHERS(M10)(8). Place the MAIN FRAME ASSEMBLY(1) to its upright
position.
REAR
FRONT
Flange Plates
face out.