Filter
Top Products
ASSEMBLY INSTRUCTIONS
8
SLOTS
STEP 8
There are two TENSION CORD ASSEMBLIES(9) and one heavier RED POWER CORD
ASSEMBLY(47). The resistance of the CUSHION ASSEMBLY(7) can be adjusted by securing the
TENSION CORD ASSEMBLIES(9, 47) in the slots located on the FRONT FRAME(1). You can achieve
various levels of resistance by securing different numbers of the
TENSION CORD ASSEMBLIES(9, 47)
in the slots.
NOTE:
STEP 9
The length on the ROPE(15) can be adjusted by pulling the ROPE(15) through the ROPE ADJUSTMENT
BRACKET(16) as shown. Be sure to adjust both ropes to the same length. In addition to the ROPE(15),
the HAND STRAP(17) can be adjusted to accommodate your size and workout needs. If you find you
need to adjust the
ROPE(15) even more, wrap the excess ROPE(15) around the ROPE ADJUSTMENT
BRACKET(16). Refer to the inset illustration.
To achieve greater resistance in the RED POWER CORD and TENSION CORD
ASSEMBLIES(47, 9), stretch and re-tie the tension cords in a more taut position.