Filter
Top Products
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove all
packing materials from your area and place them back into the box. Do not dispose of the packing materials
until assembly is completed. Read each step carefully before beginning. If you are missing a part please
call our toll-free number for assistance 1 (800) 375-7520 or e-mail us at: parts@staminaproducts.com
6
STEP 1
Remove your PILATES 4500 JP from its packaging placing the product on its side, with the LOCKING
PIN(23) side upward. Remove the LOCKING PIN(23) and unfold the MAIN FRAME ASSEMBLY
separating the half that has the attached LOCKING PIN(23). When completed, the frame should be
separated approximately 3 feet at the end.
STEP 2
Attach the four RUBBER FEET(22) to the FRONT FRAME(1) and REAR FRAME(2) with SCREWS
(M5 x 25mm)(34). Attach the PLASTIC WHEELS(21) onto the FRONT FRAME(1) with
WASHERS(M8)(44) and NYLOCK NUTS(M8)(38).
STEP 3
Unfold your PILATES 4500 JP to a flat position by moving the FRONT FRAME(1) away from the platform
end of the product in a clockwise position until fully extended.