Filter
Top Products
1010
Sit on the
SEAT(54) and pull on the HANDLEBAR(27) to verify that the Fan System provides resistance
and the Seat travel is smooth and stable.
Clean the roller tracks on the
RAIL(1) with an absorbent cloth.
It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten
loose nuts and bolts.
Worn or damaged components shall be replaced immediately or the
1400 AIR ROWER removed from
service until repair is made.
Only Stamina Products supplied components shall be used to maintain/repair the
1400 AIR ROWER.
Keep your 1400 AIR ROWER clean by wiping with an absorbent cloth after use.
1.
2.
3.
4.
5.
6.
7.
STORAGE
To store the 1400 AIR ROWER simply keep it in a clean dry place.
To avoid damage to the electronics meter, remove the batteries before storing the
1400 AIR ROWER
for one year or more.
Move the
1400 AIR ROWER with the moving wheels on the Front Stand. Grasp the Rear Stand to
move the
1400 AIR ROWER. Do not use the Seat to move the 1400 AIR ROWER. The Seat will
move and the Seat Carriage may pinch your hand or fingers.
Follow the following process to fold The
1400 AIR ROWER as illustrated for easy storage.
1.
2.
3.
4.
Remove the
PULL PIN(43) from the RAIL(1). Remove the LOCKING KNOB(44) from the
SUPPORT FRAME(4).
Move the SEAT(54) close to the back end of the RAIL(1) and fold the Fan Assembly backward.
Secure the
SUPPORT FRAME(4) in folded position by inserting the PULL PIN(43) into the RAIL(1).
Screw the LOCKING KNOB(44) into the SUPPORT FRAME(4) for storage.
a.
b.
c.
MAINTENANCE
The safety and integrity designed into the 1400 AIR ROWER can only be maintained when the 1400 AIR
ROWER is regularly examined for damage and wear. Special attention should be given to the following:
Fan Assembly