CARDIO 630 HEART RATE MONITOR
14 15
SETTING PERSONAL PROFILE
1. Select Gender by PRESSING S/S/R or ADJ.
Set and advance by PRESSING MODE.
2. Adjust Year of Birth by PRESSING S/S/R
or ADJ. Set and advance by PRESSING
MODE.
3. Select Units of Measure (Imperial=LB
or Metric=KG) by PRESSING S/S/R or ADJ.
Set and advance by PRESSING MODE.
4. Adjust Height by PRESSING S/S/R or ADJ.
Set and advance by PRESSING MODE.
5. Adjust Weight by PRESSING S/S/R or ADJ.
Set and advance by PRESSING MODE.
6. Adjust Display Contrast by PRESSING
S/S/R or ADJ. Set by PRESSING MODE. The
display will read “Saved!”
Your Sportline Cardio 630 is now ready for
use!
SETTING TIME, CALENDAR AND USER PROFILE
The Sportline Cardio 630 uses your personal profi le to calculate
information specifi c to you. The display in the programming se-
quence guides you through the settings. You adjust the informa-
tion being programmed by
PRESSING START/STOP/RESET (S/S/R)
to increase or ADJUST (ADJ) to decrease. You set the information
and advance to the next fi eld by
PRESSING MODE. The display
reads “Saved” when this sequence is complete. The monitor is
then ready for use. You may exit the Programming Sequence at
any time by PRESSING & HOLDING the MODE key.
PRESS & HOLD the MODE key In Time of Day
mode to enter the Programming Sequence.
SETTING TIME & CALENDAR
1. Adjust Hour by PRESSING START/STOP/
RESET (S/S/R) or ADJUST (ADJ). Set and
advance by PRESSING MODE.
2. Repeat Step 1 to set Minutes, Seconds,
Month, Day and Year.
3. Select 12- or 24-hour time format by
PRESSING S/S/R or ADJ. Set and advance
by PRESSING MODE.
4. Select Key Tone ON or OFF by PRESS-
ING S/S/R or ADJ. Set and advance to
personal profi le by PRESSING MODE.
PROGRAMMING THE MONITORPROGRAMMING THE MONITOR
Increase: S/S/R
Decrease: ADJ
Set & advance
to next setting:
PRESS MODE
Increase: S/S/R
Decrease: ADJ
Set & advance
to next setting:
PRESS MODE
Increase: S/S/R
Decrease: ADJ
Set & advance
to next setting:
PRESS MODE
SP1448IS01SPO.indd 14-15SP1448IS01SPO.indd 14-15 6/10/11 12:19 PM6/10/11 12:19 PM