18
SOLO 960 Heart Rate Monitor + Speed and Distance
OPERATING THE WATCH
OPERATING THE PEDOMETER/EXERCISE TIMER
The Sportline Solo 960 is equipped with a 10-hour Exercise Timer with detailed
exercise data display.
To operate Exercise Timer:
1. Access Exercise mode by PRESSING the EXERCISE DATA/RESET (EX) key from
Time of Day.
2. To start timing, PRESS THE START/STOP (S/S) key.
3. Time a lap, PRESS the S/S key.
4. Stop timing, PRESS & HOLD the S/S key.
5. Reset Timer, PRESS & HOLD the EX key until RESET ALL appears in the display.
Release the key. All exercise data will be reset to zero.
Note: DO NOT Reset if you wish to view lap detail in Memory. To view Chronograph Memory,
see page 19.
VIEWING EXERCISE DETAIL
• Select Speed, Distance or SCAN mode (the display flashes from Speed to
Distance every 3 seconds) by PRESSING & HOLDING the EX key. Release the key
when your selection appears in the display.
NOTE: In SCAN mode, the screen alternately displays Speed & Distance. You may not scroll
through Exercise Detail (see below). To deactivate SCAN mode, PRESS & HOLD EX until SCAN
OFF appears in the display.
• Scroll through Exercise Time, Calories, Fat Burned, Trip Distance, Current Speed,
Average Speed, Steps, Moving Time and Time of Day by PRESSING the EX key
(see Page 10 “Pedometer/Exercise Timer Sub Modes”).
START TIMING:
PRESS S/S
STOP TIMING:
PRESS & HOLD S/S
TIME A LAP:
PRESS S/S
RESET:
PRESS & HOLD EX
SP5141IS01ROD.indd 18IS01ROD.indd 18 1/20/12 10:57 AM1/20/12 10: