Spirit CT 800 Treadmill User Manual


 
CT800
-12-
Next to the Dot Matrix window are three LED lights labeled: Track, Speed and Incline, along with a
display button. When the Track LED is lit the dot matrix displays the Track profile, when the Speed
LED is lit the Dot matrix displays the Speed profile and when the Incline LED is lit the Dot Matrix
displays the Incline profile. You may change the Dot Matrix profile view by pressing the Display
button. After scrolling through the three profiles the Dot matrix will automatically scroll through the
three displays showing each one for four seconds. The LED associated with each profile will blink
while that view is displayed. One more press of the Display button will return you to the Track
profile.
1/4-Mile Track:
The 1/4-mile track (0.4 km) will be displayed around the dot matrix window. The flashing dot
indicates your progress. In the center of the track there is a lap counter for reference.
Heart Rate Feature:
The Pulse (Heart Rate) window will display your current heart rate in beats per minute during the
workout. You must use both left and right stainless steel sensors to pick up your pulse. Pulse
values are displayed anytime the computer is receiving a Grip Pulse signal. You may use the Grip
Pulse feature while in Heart Rate Control. The CE800 will also pick up wireless heart rate
transmitters that are Polar compatible, including coded transmissions.
Heart Rate Bar Graph:
Displays a graphical representation of your heart rate as a percentage of your maximum heart rate.
When you enter your age during programming, the console will calculate your maximum heart rate
then light up the graph to show the percent of maximum heart rate you are currently achieving.
Message Window Display:
Displays messages that help guide you through the programming process. During a program the
message window displays your workout data.
To Turn Treadmill Off:
The display will automatically turn off (go to sleep) after 30 minutes of inactivity. This function is
called sleep mode. In sleep mode, the treadmill will power down most everything except for a
minimum of circuitry for detecting key presses and the safety key so it will start up again if these
are activated. There is only a tiny amount of current used in sleep mode (about the same as your
TV when it is turned off) and it is perfectly fine to leave the main power switch on in sleep mode.
Of course you may also remove the safety key or turn off the main power switch to power down the
treadmill.
The New SPIRIT CE800 offers five preset programs, a Custom facility defined program, two heart
rate control programs, a Gerkin protocol based Fitness Test and one Manual program.
Programmable Features