Filter
Top Products
8
P/N 211376A 05/03
14.
Lower clamp cover (12) over clamps and snap into
proper position.
13.
Secure clamps (7) around pole section as shown. Refer
to Step 4. Tighten completely.
12.
11
12
12
3
12
IMPORTANT!
ELEVATOR HOLES MUST BE PARALLEL WITH
PLAYING SURFACE.
TWO PERSON MINIMUM
REQUIRED FOR THIS
PROCEDURE.
NOT FOLLOWING
RECOMMENDATION MAY
RESULT IN BODILY INJURY.
WARNING
Remove pole cap (11) from bottom pole section and
insert clamp cover (12) onto bottom section (3). Bend
back exposed top flange sections of secured ground
sleeve (4) as shown. Then insert pole into ground
sleeve (4).
PLAYING
SURFACE
7
4