Filter
Top Products
www.smoothfitness.co.uk
25
A
SSEMBLY
STEP 4: Assemble the Upright
(A) Assemble the Upright-Left (110) and Upright-Right (111) to the
Handlebar assembly and secure using two M8 x 56mm Allen Head Bolts
(506). Do not completely tighten M8 x 56mm Allen Head Bolts until
step C.
(B) Place the Upright Assembly to the Base Frame (104) and secure with
four M8 x 105 x 20mm Carriage Bolts (519), four M8 x 20 x 1.5mm Cup
Washers (518) and N8 Nylon Nuts (517).
(C) Tighten M8 x 56mm Allen Head Bolt (506)
(D) Connect the 8Pin Power Wire-Lower (618) to the 8Pin Power Wire-
Middle (617).
506 X2
517 X4
518 X4
519 X4
102
109
111
506
108
110
506
617
618
517
519
519
518
517
519
517
518
519
104
111
110
518